An RE/RM approach to the design and Manufacture of removable partial dentures With a biocompatibility analysis of the F75 Co-Cr SLM alloy

Danimir P. Jevremović; Tatjana M. Puškar; Igor Budak; Djordje Vukelić; Vesna Kojić; Dominic Eggbeer; Robert J. Williams

An RE/RM approach to the design and Manufacture of removable partial dentures With a biocompatibility analysis of the F75 Co-Cr SLM alloy

Danimir P. Jevremović, Tatjana M. Puškar, Igor Budak^*, Djordje Vukelić, Vesna Kojić, Dominic Eggbeer, Robert J. Williams

^*Corresponding author for this work

Research output: Contribution to journal › Article › peer-review

19 Citations (Scopus)

Abstract

The implementation of computer-aided technologies and systems has paved the way towards a significant advancement of the conventional modelling and manufacture of dental replacements. In this research the focus is on approach that combines reverse engineering as a modelling technique and rapid manufacture, i.e., selective laser melting, as the manufacturing technology, with special emphases on material selection in the fabrication of removable partial dentures. The paper presents the results of a biocompatibility analysis of the F75 Co-Cr dental alloy using the MTT eluate test.

Original language	English
Pages (from-to)	123-129
Number of pages	7
Journal	Materiali in Tehnologije
Volume	46
Issue number	2
Publication status	Published - Mar 2012

Keywords

Biocompatibility
Co-Cr alloys
MTT eluate test
Rapid manufacturing
Removable partial dentures
Reverse engineering
Selective laser melting

Cite this

@article{17e266ee530f49029b91e1e7f3868bfe,

title = "An RE/RM approach to the design and Manufacture of removable partial dentures With a biocompatibility analysis of the F75 Co-Cr SLM alloy",

abstract = "The implementation of computer-aided technologies and systems has paved the way towards a significant advancement of the conventional modelling and manufacture of dental replacements. In this research the focus is on approach that combines reverse engineering as a modelling technique and rapid manufacture, i.e., selective laser melting, as the manufacturing technology, with special emphases on material selection in the fabrication of removable partial dentures. The paper presents the results of a biocompatibility analysis of the F75 Co-Cr dental alloy using the MTT eluate test.",

keywords = "Biocompatibility, Co-Cr alloys, MTT eluate test, Rapid manufacturing, Removable partial dentures, Reverse engineering, Selective laser melting",

author = "Jevremovi{\'c}, {Danimir P.} and Pu{\v s}kar, {Tatjana M.} and Igor Budak and Djordje Vukeli{\'c} and Vesna Koji{\'c} and Dominic Eggbeer and Williams, {Robert J.}",

year = "2012",

month = mar,

language = "English",

volume = "46",

pages = "123--129",

journal = "Materiali in Tehnologije",

issn = "1580-2949",

number = "2",

}

TY - JOUR

T1 - An RE/RM approach to the design and Manufacture of removable partial dentures With a biocompatibility analysis of the F75 Co-Cr SLM alloy

AU - Jevremović, Danimir P.

AU - Puškar, Tatjana M.

AU - Budak, Igor

AU - Vukelić, Djordje

AU - Kojić, Vesna

AU - Eggbeer, Dominic

AU - Williams, Robert J.

PY - 2012/3

Y1 - 2012/3

N2 - The implementation of computer-aided technologies and systems has paved the way towards a significant advancement of the conventional modelling and manufacture of dental replacements. In this research the focus is on approach that combines reverse engineering as a modelling technique and rapid manufacture, i.e., selective laser melting, as the manufacturing technology, with special emphases on material selection in the fabrication of removable partial dentures. The paper presents the results of a biocompatibility analysis of the F75 Co-Cr dental alloy using the MTT eluate test.

AB - The implementation of computer-aided technologies and systems has paved the way towards a significant advancement of the conventional modelling and manufacture of dental replacements. In this research the focus is on approach that combines reverse engineering as a modelling technique and rapid manufacture, i.e., selective laser melting, as the manufacturing technology, with special emphases on material selection in the fabrication of removable partial dentures. The paper presents the results of a biocompatibility analysis of the F75 Co-Cr dental alloy using the MTT eluate test.

KW - Biocompatibility

KW - Co-Cr alloys

KW - MTT eluate test

KW - Rapid manufacturing

KW - Removable partial dentures

KW - Reverse engineering

KW - Selective laser melting

UR - http://www.scopus.com/inward/record.url?scp=84861672824&partnerID=8YFLogxK

M3 - Article

AN - SCOPUS:84861672824

SN - 1580-2949

VL - 46

SP - 123

EP - 129

JO - Materiali in Tehnologije

JF - Materiali in Tehnologije

IS - 2

ER -

An RE/RM approach to the design and Manufacture of removable partial dentures With a biocompatibility analysis of the F75 Co-Cr SLM alloy

Abstract

Keywords

Other files and links

Cite this