A Scalable Power Splitter using High Sheet Polysilicon Resistor Suitable for RFIC Application

Jasim Uddin; M. N. Shakib; Syed Zahurul Islam; Md Mahadi Hasan; Habib Ullah; Md Arafatur Rahman

doi:10.1109/ITSS-IoE56359.2022.9990955

A Scalable Power Splitter using High Sheet Polysilicon Resistor Suitable for RFIC Application

Jasim Uddin^*, M. N. Shakib, Syed Zahurul Islam, Md Mahadi Hasan, Habib Ullah, Md Arafatur Rahman

^*Awdur cyfatebol y gwaith hwn

Allbwn ymchwil: Pennod mewn Llyfr/Adroddiad/Trafodion Cynhadledd › Cyfraniad mewn cynhadledd › adolygiad gan gymheiriaid

1 Dyfyniad (Scopus)

Crynodeb

Integrated circuits employing CMOS RF technology are increasingly common and widely deployed. There are currently a wide range of materials available for use in the process that are optimised for RF noise, matching characteristics, and improved resistivity. In this paper, the highly resistive passive resistor component is used in the power splitter circuits, where a high sheet polysilicon resistor is the best choice. The high sheet polysilicon resistor and its extracted parasitic capacitance are shown to be the best match among the various resistors mentioned in the literature. Power splitter circuits use these resistor characteristics to get the best possible results, such as low return and insertion losses and good isolation. In order to get the desired resistor values for the power splitter's individual components, twelve parallel high sheet poly resistors are employed. A total of six electronic componentsâtwo metal finger capacitors and four lumped element spiral inductorsâare employed. Power splitter and probe pad components from the layout are on display. The correctness of the layout is confirmed by simulations run before to and after layout. The design schematic, pre-layout and post layout simulation results confirms that high sheet polysilicon resistors are the best selected potential candidate for RFIC application.

Iaith wreiddiol	Saesneg
Teitl	International Conference on Intelligent Technology, System and Service for Internet of Everything, ITSS-IoE 2022
Cyhoeddwr	Institute of Electrical and Electronics Engineers Inc.
ISBN (Electronig)	9781665459983
Dynodwyr Gwrthrych Digidol (DOIs)	https://doi.org/10.1109/ITSS-IoE56359.2022.9990955
Statws	Cyhoeddwyd - 28 Rhag 2022
Digwyddiad	2022 International Conference on Intelligent Technology, System and Service for Internet of Everything, ITSS-IoE 2022 - Virtual, Online, Yemen Hyd: 3 Rhag 2022 → 5 Rhag 2022

Cyfres gyhoeddiadau

Enw	International Conference on Intelligent Technology, System and Service for Internet of Everything, ITSS-IoE 2022

Cynhadledd

Cynhadledd	2022 International Conference on Intelligent Technology, System and Service for Internet of Everything, ITSS-IoE 2022
Gwlad/Tiriogaeth	Yemen
Dinas	Virtual, Online
Cyfnod	3/12/22 → 5/12/22

Mynediad at Ddogfen

10.1109/ITSS-IoE56359.2022.9990955

Ffeiliau eraill a chysylltiadau

Dolen i’r cyhoeddiad yn Scopus

Dyfynnu hyn

Uddin, J., Shakib, M. N., Islam, S. Z., Hasan, M. M., Ullah, H., & Rahman, M. A. (2022). A Scalable Power Splitter using High Sheet Polysilicon Resistor Suitable for RFIC Application. Yn International Conference on Intelligent Technology, System and Service for Internet of Everything, ITSS-IoE 2022 (International Conference on Intelligent Technology, System and Service for Internet of Everything, ITSS-IoE 2022). Institute of Electrical and Electronics Engineers Inc.. https://doi.org/10.1109/ITSS-IoE56359.2022.9990955

Uddin, Jasim ; Shakib, M. N. ; Islam, Syed Zahurul et al. / A Scalable Power Splitter using High Sheet Polysilicon Resistor Suitable for RFIC Application. International Conference on Intelligent Technology, System and Service for Internet of Everything, ITSS-IoE 2022. Institute of Electrical and Electronics Engineers Inc., 2022. (International Conference on Intelligent Technology, System and Service for Internet of Everything, ITSS-IoE 2022).

@inproceedings{1170df0bb322498d8803636ea1c6fb36,

title = "A Scalable Power Splitter using High Sheet Polysilicon Resistor Suitable for RFIC Application",

abstract = "Integrated circuits employing CMOS RF technology are increasingly common and widely deployed. There are currently a wide range of materials available for use in the process that are optimised for RF noise, matching characteristics, and improved resistivity. In this paper, the highly resistive passive resistor component is used in the power splitter circuits, where a high sheet polysilicon resistor is the best choice. The high sheet polysilicon resistor and its extracted parasitic capacitance are shown to be the best match among the various resistors mentioned in the literature. Power splitter circuits use these resistor characteristics to get the best possible results, such as low return and insertion losses and good isolation. In order to get the desired resistor values for the power splitter's individual components, twelve parallel high sheet poly resistors are employed. A total of six electronic components{\^a}two metal finger capacitors and four lumped element spiral inductors{\^a}are employed. Power splitter and probe pad components from the layout are on display. The correctness of the layout is confirmed by simulations run before to and after layout. The design schematic, pre-layout and post layout simulation results confirms that high sheet polysilicon resistors are the best selected potential candidate for RFIC application.",

keywords = "High Sheet Polysilicon resistor, N-well Resistor, RF CMOS, Splitter",

author = "Jasim Uddin and Shakib, {M. N.} and Islam, {Syed Zahurul} and Hasan, {Md Mahadi} and Habib Ullah and Rahman, {Md Arafatur}",

note = "Publisher Copyright: {\textcopyright} 2022 IEEE.; 2022 International Conference on Intelligent Technology, System and Service for Internet of Everything, ITSS-IoE 2022 ; Conference date: 03-12-2022 Through 05-12-2022",

year = "2022",

month = dec,

day = "28",

doi = "10.1109/ITSS-IoE56359.2022.9990955",

language = "English",

series = "International Conference on Intelligent Technology, System and Service for Internet of Everything, ITSS-IoE 2022",

publisher = "Institute of Electrical and Electronics Engineers Inc.",

booktitle = "International Conference on Intelligent Technology, System and Service for Internet of Everything, ITSS-IoE 2022",

}

Uddin, J, Shakib, MN, Islam, SZ, Hasan, MM, Ullah, H & Rahman, MA 2022, A Scalable Power Splitter using High Sheet Polysilicon Resistor Suitable for RFIC Application. yn International Conference on Intelligent Technology, System and Service for Internet of Everything, ITSS-IoE 2022. International Conference on Intelligent Technology, System and Service for Internet of Everything, ITSS-IoE 2022, Institute of Electrical and Electronics Engineers Inc., 2022 International Conference on Intelligent Technology, System and Service for Internet of Everything, ITSS-IoE 2022, Virtual, Online, Yemen, 3/12/22. https://doi.org/10.1109/ITSS-IoE56359.2022.9990955

A Scalable Power Splitter using High Sheet Polysilicon Resistor Suitable for RFIC Application. / Uddin, Jasim; Shakib, M. N.; Islam, Syed Zahurul et al.
International Conference on Intelligent Technology, System and Service for Internet of Everything, ITSS-IoE 2022. Institute of Electrical and Electronics Engineers Inc., 2022. (International Conference on Intelligent Technology, System and Service for Internet of Everything, ITSS-IoE 2022).

Allbwn ymchwil: Pennod mewn Llyfr/Adroddiad/Trafodion Cynhadledd › Cyfraniad mewn cynhadledd › adolygiad gan gymheiriaid

TY - GEN

T1 - A Scalable Power Splitter using High Sheet Polysilicon Resistor Suitable for RFIC Application

AU - Uddin, Jasim

AU - Shakib, M. N.

AU - Islam, Syed Zahurul

AU - Hasan, Md Mahadi

AU - Ullah, Habib

AU - Rahman, Md Arafatur

PY - 2022/12/28

Y1 - 2022/12/28

N2 - Integrated circuits employing CMOS RF technology are increasingly common and widely deployed. There are currently a wide range of materials available for use in the process that are optimised for RF noise, matching characteristics, and improved resistivity. In this paper, the highly resistive passive resistor component is used in the power splitter circuits, where a high sheet polysilicon resistor is the best choice. The high sheet polysilicon resistor and its extracted parasitic capacitance are shown to be the best match among the various resistors mentioned in the literature. Power splitter circuits use these resistor characteristics to get the best possible results, such as low return and insertion losses and good isolation. In order to get the desired resistor values for the power splitter's individual components, twelve parallel high sheet poly resistors are employed. A total of six electronic componentsâtwo metal finger capacitors and four lumped element spiral inductorsâare employed. Power splitter and probe pad components from the layout are on display. The correctness of the layout is confirmed by simulations run before to and after layout. The design schematic, pre-layout and post layout simulation results confirms that high sheet polysilicon resistors are the best selected potential candidate for RFIC application.

AB - Integrated circuits employing CMOS RF technology are increasingly common and widely deployed. There are currently a wide range of materials available for use in the process that are optimised for RF noise, matching characteristics, and improved resistivity. In this paper, the highly resistive passive resistor component is used in the power splitter circuits, where a high sheet polysilicon resistor is the best choice. The high sheet polysilicon resistor and its extracted parasitic capacitance are shown to be the best match among the various resistors mentioned in the literature. Power splitter circuits use these resistor characteristics to get the best possible results, such as low return and insertion losses and good isolation. In order to get the desired resistor values for the power splitter's individual components, twelve parallel high sheet poly resistors are employed. A total of six electronic componentsâtwo metal finger capacitors and four lumped element spiral inductorsâare employed. Power splitter and probe pad components from the layout are on display. The correctness of the layout is confirmed by simulations run before to and after layout. The design schematic, pre-layout and post layout simulation results confirms that high sheet polysilicon resistors are the best selected potential candidate for RFIC application.

KW - High Sheet Polysilicon resistor

KW - N-well Resistor

KW - RF CMOS

KW - Splitter

UR - http://www.scopus.com/inward/record.url?scp=85146496752&partnerID=8YFLogxK

U2 - 10.1109/ITSS-IoE56359.2022.9990955

DO - 10.1109/ITSS-IoE56359.2022.9990955

M3 - Conference contribution

AN - SCOPUS:85146496752

T3 - International Conference on Intelligent Technology, System and Service for Internet of Everything, ITSS-IoE 2022

BT - International Conference on Intelligent Technology, System and Service for Internet of Everything, ITSS-IoE 2022

PB - Institute of Electrical and Electronics Engineers Inc.

T2 - 2022 International Conference on Intelligent Technology, System and Service for Internet of Everything, ITSS-IoE 2022

Y2 - 3 December 2022 through 5 December 2022

ER -

Uddin J, Shakib MN, Islam SZ, Hasan MM, Ullah H, Rahman MA. A Scalable Power Splitter using High Sheet Polysilicon Resistor Suitable for RFIC Application. Yn International Conference on Intelligent Technology, System and Service for Internet of Everything, ITSS-IoE 2022. Institute of Electrical and Electronics Engineers Inc. 2022. (International Conference on Intelligent Technology, System and Service for Internet of Everything, ITSS-IoE 2022). doi: 10.1109/ITSS-IoE56359.2022.9990955